3M 1465DWIT Datasheet download pdf

1465 Helmet

Data Sheet

Standard

The 3M 1465 helmet has been tested to the European Standard

EN397, and meets the following additional voluntary require-

ments.

Marking

• Very low temperatures -30°C

• Leakage current 440 vac

• Lateral deformation LD

• Molten metal splashes in accordance with EN397 MM

Use Information

- The helmet with proper adjustment should only be used for

the purpose intended.

- The helmet offers the wearer protection against objects likely

to strike the head.

- The helmet can offer some protection against light blows to

the front, side or the back of the helmet.

- Avoid contact with electrical wires when using the helmet.

- Chin strap may be fitted to the helmet.

- Replace helmet shell immediately if there is any sign of

physical damage.

- 3M can provide assistance or information on the correct

usage of the 1465 helmet.

For further information, please contact 3M.

Ventilation

Ventilation holes on both sides of the top ridge of the helmet

can easily be punched out of the pre-prepared section using a

4mm screwdriver.

Storage and Cleaning

When the helmet is not in use it should be stored away from

direct sunlight, rain or cold temperatures. The helmet should

be cleaned with a mild soap detergent.

Direct contact with sprays, liquids or other materials

containing organic solvents and/or alcohols may reduce the

resistance of the helmet shell.

Main Features

- Harness & 6-point suspension with new damping system

- Fits wide range of head sizes

- Approved for use in very low temperatures

- Ventilation holes

- Tested and approved to European Standard EN397 including

additional voluntary requirements

Applications

The 3M 1465 helmet can be used in a wide range of industries

where head protection is required.

• Construction • Metal industry

• Wood processing • Oil/Petroleum

• Chemical industry • Automotive

Approval

The 3M 1465 helmet has been shown to meet the ‘Basic

Safety Requirements’ under Article 10 of the European

Community Directive 89/686.

An EC type examination certification No1278801 has been

issued by SP. The Swedish National Testing and Research

Institute. The product is CE marked.

Materials

The following materials are used in the production of this

helmet:

• Shell - Polyethylene (High Density)

• Head band - Polyethylene (Low Density)

• Sweat band - Polyester, Acrylic PVC

• Cradle - Polyester (Terylene)

• Fittings - Polyethylene (Low Density)

Spare Parts

- 6 point suspension harness

- Chin strap

1 2

1465 Helmet 1

Summary of Contents

Page 1 - 1465 Helmet

1465 HelmetData SheetStandardThe 3M 1465 helmet has been tested to the European StandardEN397, and meets the following additional voluntary require-me

Page 2

Warnings• Do NOT apply paint, solvents, adhesives or self adhesivelabels on to the helmet.• Use ONLY rubber or acrylic based adhesives to stickanythin

Comments to this Manuals

No comments

3M 1465DWIT Datasheet

Browse online or download Datasheet for Safety helmets 3M 1465DWIT. 3M Safety Helmet 1465. User Manual

Summary of Contents

Comments to this Manuals