3M 2178-XSB Technical Information download pdf (Page 9)

78-8135-0094-5-K

3.12 For ribbon transition to tray applications,

secure the transition tube to the bracket

mounted in base.

Figure 13

3.13 When tray support and tray are in place,

mount the other end of the transition tube to

the tray.

Figure 14

4.0 Drop Cable Preparation

4.1 Determine how many drop cables will be

passing through the 3M

™

Multiport Grommet.

4.2 Remove sheath on drops exposing buffer tubes

to a length required per company practice.

4.3 Insert drops into multiport grommet first and

then insert blank plugs last.

Note: A small amount of lubricant provided in kit may

be placed on blank plugs and cable to allow

for ease of installation into multiport grommet.

An additional method to ease installation is to

take sheath scuff supplied in closure kits, and

slightly sand the leading edge of the drop cable

and blank plugs.

Figure 15

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

3M 2178-XSB Technical Information Page 9