3M 50642-00000 Datasheet download pdf

Araldite

Rapid

2x100ml Tube

A strong, long lasting solvent free adhesive which is water resistant and

can be painted or sanded.

Important

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard,

leather, cardboard, fabric, rubber and most plastics (except polyethylene,

polypropylene, Teﬂon®).

Make sure surfaces are clean and free from dust, corrosion, dirt and grease.

For optimum bonding, slightly roughen surfaces with sandpaper and degrease

metals with a suitable solvent. During assembly apply light pressure to the joint

until set (clamps, tape around 20 minutes. Allow 3 hours to attain full strength

before rough handling or sanding.

How to apply

Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts

repositionable for 4 minutes. Oil, chemical and impact resistant. High

temperature resistance (-30°C to 65°C). Do not use to repair or bond items that

will contact food or drink. Not recommended for bonding rearview mirrors to car

windscreens.

Storage

Should be stored in a dry place at room temperature in the original tubes.

New

Environmentally friendly product formulation.

2011. Huntsman

Advanced Materials (Switzerland)

Araldite

is a registered trademark

of Huntsman Corporation or an

afﬁliate thereof in one or more, but

not all countries.

www.go-araldite.com

Araldite® Rapid 2x100ml TubeA strong, long lasting solvent free adhesive which is water resistant and can be painted or sanded.ImportantBonds metal,

No comments

3M 50642-00000 Datasheet