3M M2767PW User's Guide download pdf (Page 12)

12 3M™ Multi-Touch Desktop Display User Guide

3M Touch Systems, Inc. Proprietary Information – TSD-40532C

To connect the Multi-Touch Desktop Display:

1. Turn off your computer. You should always turn off the computer before connecting

or disconnecting a device.

2. Select either the DVI/HGMI or VGA cable. Connect one end of the video cable to

the video connector on the display. Connect the other end to the video card in your

computer.

3. Connect one end of the touch sensor USB cable to the LCD. Connect the other end to

an available port on your computer.

4. Plug the AC power cord into the display.

5. Connect the power cable to an appropriate power source.

Testing the Multi-Touch Desktop Display

Note: The Desktop Display has a power status light located on the front of the bezel.

After connection, turn on the power switch located at the bottom of the front bezel.

Before testing your touch display, make sure all cables are connected properly. Be sure to

tighten all cable screws.

To test that the display is working properly:

1. Turn on your computer. Do not touch the screen during the startup sequence so you

do not interrupt the initialization sequence which affects touch positioning.

2. Make sure the video image is displayed. If it is not, check the LED to ensure that the

display is not in power save mode (orange).

3. Make sure the video image is centered within the screen area. Use the display

controls to adjust the image, if necessary.

You can adjust the horizontal and vertical position, contrast, and brightness to better suit

your video card and your personal preference.

VESA Mounting Option

If you do not want to utilize the stand, you may remove it and use an alternative VESA

mount. The unit has a VESA mounting pattern on the back to allow for arm mount

capability. Refer to the table below for specifics on your display.

Model VESA Pattern

M1866PW 100 x 100

M2167PW 100 x 100

M2467PW 200 x 100

M2767PW 200 x 100

Use M4 x 8 mm screws to secure the VESA mount stand. Follow the manufacturer's

instructions included with the mounting device to properly attach your display.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

3M M2767PW User's Guide Page 12