3M MP7720 Owner's Manual download pdf (Page 4)

™

Personal Projector MP7720

,QWURGXFWLRQ

Caution

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. AND

PLEASE READ ALL OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PRO-

JECTOR. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE .

Safety Instructions

1. Read all of these instructions before you operate your projector and save them

for future reference.

2. The lamp becomes extremely hot during operation. Keep the projector cool for

approximately 45 minutes prior to removing the lamp assembly for replacement.

Do not operate lamps beyond the rated lamp life. Excessive operation of lamps

beyond rated life could cause them to explode in rare occasions.

3. Power is still available when the projector is in the standby mode. Never replace

lamp assembly or any electronic components unless the projector is unplugged.

4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to

a qualified technician when service or repair work is required. Incorrect

reassembly can cause electric shock when the appliance is subsequently used.

5. Do not place this product on an unstable cart, stand, or table. The product may

fall, causing serious damage to the product.

6. This product is capable of displaying inverted images for ceiling mount

configurations. Please use suitable equipment for mounting the unit and make

sure it is securely installed.

7. To prevent the lamp from bursting, change the lamp after changing the

mounting position of the projector (desktop to ceiling mount or ceiling mount to

desktop mount).

Caution

• Always open the lens shutter or remove the lens cap when the projector lamp is

on.

• Do not look straight at the projector lens during operation. The intense light beam

may damage your eyesight.

• In some countries, the line voltage is NOT stable. This projector is designed to

operate safely within a bandwidth of 110 to 230 volts, but could fail if power drops

or surges of

10 volts occur. In these high-risk areas, it is recommended to install

a power stabilizer unit.

Save These Instructions: The information contained in this manual will help you

operate and maintain your 3M™ MP7720 Personal Projector.

1 2 3 4 5 6 7 8 9 ... 33 34

No comments

3M MP7720 Owner's Manual Page 4