3M MP8747 Owner's Manual download pdf (Page 24)

™

Personal Projector MP8746/MP8747

Cleaning the Air Filter

✔

Note: Clean the air filter about every 100 hours or if the message “CHECK AIR FLOW” is

displayed on the screen. If air is restricted due to dust accumulation on filter, the

projector may overheat and shut down automatically.

Turn off the MAIN POWER SWITCH of the projector and pull out power cord. Let cool for

20 minutes. Vacuum dust and dirt from filter. If the filter cannot be cleaned and needs to be replaced,

please consult your dealer.

Figure 5.1 Cleaning Air Filter

Section 5: Maintenance

Cleaning the Inner Components

For safety reasons, have your dealer check and clean inside the projector every two years. (Cleaning it

yourself can be hazardous.)

Cleaning the Lens

Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.

Cleaning the Projector Case and Remote Control Transmitter

Gently wipe with a soft cloth. If necessary, slightly dampen cloth with water and/or a neutral detergent. Wipe

dry with a soft, clean cloth.

Caution

• Turn off the power and remove power cord from outlet before beginning any

maintenance work.

• Do not use projector without air filter.

• Do not use harsh detergents or chemicals (like benzene or thinners).

• Do not use cleaning sprays.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

3M MP8747 Owner's Manual Page 24