3M C1060 Owner's Manual download pdf (Page 31)

Model C1060 Troubleshooting

 3M 2001 February

7. No Talk or listen from the

menu sign when using the

backup wired intercom. The

C1060 system works OK.

1. The base station is turned on.

2. No power to the backup

intercom.

3. The volume controls are set too

low on the backup intercom.

4. Defective backup intercom or

wiring.

1. Turn the base station OFF.

2. Turn the backup intercom on or

plug in its power transformer.

3. Turn the volume controls up.

4. Call for authorized service.

8. No Talk or Page to other

headsets from a single headset,

or Talk or Page buttons require

excessive pressure to operate.

1. Worn or defective Talk or Page

switch.

2. Defective headset.

1. Call for authorized service.

2. Call for authorized service.

9. Low Talk volume on a single

headset.

1. The holes in front of the

microphone are plugged with

dirt or grease.

2. Operator is not positioning the

microphone correctly.

1. Call for authorized service.

2. Refer to Operating Guide.

3. Defective headset. 3. Call for authorized service.

10. Louder Talk volume or

feedback from a single headset.

1. The holes in back of the

microphone are plugged with

dirt or grease.

1. Call for authorized service.

11. Constant programming tones

heard on a single headset.

Programming cable has no

effect.

1. Defective headset. 1. Call for authorized service.

12. The “hands free” function does

not work.

1. The Talk Lock button is not

enabled on the headset.

1. Refer to the Operating

Instructions to enable Talk

Lock.

2. The system is operating in

Standard mode.

2. Talk Lock is disabled in

Standard mode.

1 2 ... 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

3M C1060 Owner's Manual Page 31

Comments to this Manuals