3M C2254PW User's Guide download pdf (Page 19)

3M™ Multi-Touch Chassis Display User Guide 19

3M Touch Systems, Inc. Proprietary Information – TSD-37732F

OSD Choices Description

User Settings

Adjust the Red, Green and Blue channels to your preference. Settings

are saved automatically.

IMAGE

Auto Adjust

Choices are Auto Adjust, Clock, Phase, H Position, V Position.

Not available when using the DVI connection

Auto Adjust

Performs automatic configuration of the Clock, Phase, Vertical and

Horizontal positions. If you do an Auto Tune, the display will try to

find the best setting. If you are not satisfied with the auto adjustment,

fine-tune the settings manually as described below. Settings are saved

automatically.

Clock

Phase

H Position

Clock

If the clock setting is not fine-tuned, you may observe periodic

vertical bars of video noise on your image. These bars of noise are

usually adjusted out when an Auto Adjust is performed. If the bars of

noise are still present, this setting can be adjusted manually. Settings

are saved automatically.

Phase

Adjust this setting so that either the vertical bars of noise are replaced

by an even amount of noise across the whole screen, or the noise

disappears completely. Settings are saved automatically.

H Position (Horizontal Position)

Moves image horizontally on screen either left or right. Settings are

saved automatically.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

No comments

3M C2254PW User's Guide Page 19