3M M1700SS Specifications download pdf (Page 15)

3M™ MicroTouch™ Display M1700SS User Guide 15

Document #19-268 Rev AL

Figure 6. Disassembling the Display from Its Base for Arm Mounting

M1700SS Display Wall-Mount Locking Mechanism

CAUTION

To avoid the risk of minor or moderate personal injury or damage to the

monitor:

• Never wall-mount the display without the locking mechanism in place.

• Use an anchoring system appropriate for the weight of the product.

• Consult a construction professional before attempting to hang the unit on the

wall.

To lock the M1700SS Display in place for wall mounting, use the locking mechanism

included in a separate bag with your display. Position the monitor to 90° flat and lock

the front latch in place. As an extra measure, insert the U-shaped metal retention clip

into the holes in the base as indicated in the drawing below. Tighten the screw in place

and your display is ready to hang securely on the wall.

Step 1 – Unlock front mechanism and

disconnect all cables from the display.

Step 2 -- With the unit laying face down safely

and securely on a nonabrasive surface,

remove the two screws connecting the name

plate and support rods to the display. Lift the

support rods out of the base and set aside.

Step 3 -- Then remove the four screws holding

the hinge in place and gently remove the base.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

No comments

3M M1700SS Specifications Page 15