3M M1700SS Specifications download pdf (Page 29)

3M™ MicroTouch™ Display M1700SS User Guide 29

Document #19-268 Rev AL

CHAPTER 4

Maintenance and Troubleshooting

If you have a problem setting up or using your display, you may be able to solve it

yourself. Before calling 3M Touch Systems, try the suggested actions that are

appropriate to the problems you are experiencing with the display. You may also want to

consult your video card user’s manual for additional troubleshooting advice.

Maintaining Your Touch Display

To maintain your display and keep your display operating at peak performance:

• Keep your display and sensor clean.

• Adjust the display video controls. Refer to Chapter 3 for more information.

• Do not install the display in a place where ventilation may be hindered. Always

maintain adequate ventilation to protect the display from overheating and to ensure

reliable and continued operation.

Touch Sensor Care and Cleaning

The touch sensor requires very little maintenance. 3M Touch Systems recommends that

you periodically clean the glass touch sensor surface.

Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning

agent for your touch sensor. You can also use straight isopropyl alcohol.

CAUTION

To avoid the potentially hazardous situations associated with the use of alcohol or

other solvents which may result in minor or moderate injury or property

damage:

• Follow all instructions and recommendations in the manufacturer's Material Safety

Data Sheet and product label.

• Be sure to follow solvent manufacturer's precautions and directions for use when

using any solvents

• It is important to avoid using any caustic chemicals on the touch sensor. Do not use

any vinegar-based solutions.

• Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

No comments

3M M1700SS Specifications Page 29