3M C3266PW User's Guide download pdf (Page 15)

3M™ Multi-Touch Chassis Display User Guide 15

3M Touch Systems, Inc. Proprietary Information – TSD-39373B

Mounting the Multi-Touch Chassis Display

The Multi-Touch Chassis Display is designed to fit any type of enclosure. All 3M Touch

Systems chassis displays are encased in rugged metal instead of plastic, making them

easy to integrate.

CAUTION

To avoid the risk of glass breakage which may result in minor or moderate injury:

• To avoid risk of injury when handling the display be aware that the sensor edges

may be sharp.

The Multi-Touch Chassis Display includes a hardware accessory kit for mounting the

unit into an enclosure. The hardware accessory kit includes 4 mounting brackets and (12)

8-32 screws. The mounting holes are located on all 4 sides of the display. Always use the

supplied screws.

Note: Always use the mounting holes when attaching to the brackets. Do not drill

additional holes in the unit to mount brackets to other locations.

To remove the bezel, simply remove the screws along the edge.

Once you remove the bezel, you can attach the brackets to the edges of the chassis. The

brackets are slotted, allowing the chassis to slide in and out. You can also rotate the

brackets to various positions.

Note: Given the variety of factors that can affect the use and performance of any

product, some of which are uniquely within the user’s knowledge and control, it is

essential that the user evaluate the specific gasket to determine whether it is suitable for a

particular purpose and suitable for the user’s intended application.

Articulating Arm Mounting Option

The unit has a 200 mm VESA mounting pattern on the back to allow for arm mount

capability. Use 3/8 inch (9mm) screws to secure the VESA mount stand for use only with

UL listed wall mount bracket with minimum weight load capability of 33 lbs (15 kg).

Follow the manufacturer's instructions included with the mounting device to properly

attach your display.

NOTICE

To avoid the risk of potential damage to the display electronics:

• Always use the VESA 200 mm mounting holes when using an arm attachment. Do

not drill additional holes in the unit to mount plates other locations

• Do not use longer screws as they could potentially damage electronics inside the

display.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

No comments

3M C3266PW User's Guide Page 15